3D Thermofoil
LG Hausys 3D Forming Foil is PVC decorative film for membrane pressing or vacuum forming to laminate fiberboards. The surface is coated with various lacquers from anti scratch to semi gloss while the reverse is coated with primer to promote a durable bond. Also its high performing coating layers give advantages on scratch, abrasion, moisture resistance and durability along with a wide range of patterns and designs includes realistic wood grain patterns, solid colors and abstract designs.
Application
- Designed for 3D lamination on routed medium density fiberboards (MDF)
- Highly contoured furniture component, Cabinet Doors
- Store fixtures, Counters
Benefits
- Excellent Scratch resistance, stain resistance, light fastness and resistance to high temperature protect the surface of furniture for decades.
- Easy application to three dimensional surfaces
- Various cross reference pattern with TFM , HPL and Paper companies all around world.
Line Up
- Natural Bestin- Real Wood Pearl Effect
- Semi-Glossy - Glossy level is set at the mid of 'standard' and 'high glossy'.
- Miraein - Double Prints that increases reality of wooden patterns.
- Innoface - Super Matt finish that replaces paints
- El Reina - Abstract patterns
- Artisan - Special embossing that increases the reality of patterns
- Nature Skin - Much closer to real wood with deep embossing
Structure
Characteristics
| Index | Test Method | Specification | Tolerances |
|---|---|---|---|
| Thickness | 0.3mm ~ 0.4mm | ± 0.01 | |
| Width | 1,450mm | ||
| Tensile Strength | DIN EN ISO 527-1 |
L: 360kg/cm²
W: 300kg/cm²
|
L: ≥ 360kg/cm²
W: ≥ 300kg/cm²
|
| Chemical Resistance | DIN 68861,Part 1 | Class 1B | |
| Resistance to Scratching | DIN 68861,Part 4 | Class 4D | |
| Resistance to Heat Dry | DIN 68861,Part 7 | Class 7C | |
| Resistance to Heat Moist | DIN 68861,Part 8 | Class 7C | |
| Elongation with Heat |
LG Test Method
(90°C/3min)
| 300 % | ≥ 300 % |
| Dimensional change |
LG Test Method
(80°C/10min)
|
Longitudinal: max. ±2.5%
Transverse: max. ±1.0%
| |
| Color consistency | Manufacture and visual assessment with original specimen | ||
| Fault Definition | Optical deviations are regarded as faults if they are recognizable with the naked eye from a distance of 50cm within 30seconds in daylight | ||
Source from : lghausys
No comments:
Post a Comment